Gear Related Machines

Product Details:

Specification

SPECIFICATIONS:

Inch Conversion

RETROFIT WITH SIEMSNS 808 2-AXIS CNC CONTROL
MAX PITCH DIAMETER, EXTERNAL 254 MM
MIN PITCH DIAMETER, INTERNAL 254 MM
MAX DIAMETRAL PITCH, SPUR 4 DP
MAX DIAMETRAL PITCH, HELICAL 5 DP
MAX FACE WIDTH 102 MM
MAX HELIX ANGLE W/ 127 MM CUTTER 45 DEG
MAX O D OF FIXTURE 483 MM
MAX STROKE LENGTH 127 MM
MAX STROKES PER MINUTE 800 SPM
DISTANCE - TABLETOP TO SPINDLE 203 MM
FEED PER STROKE .001-.040
CUTTER SPINDLE DIAMETER 90 MM
WORK SPINDLE BORE DIAMETER 149 MM
WORK SPINDLE BORE DEPTH 254 MM
TABLE SURFACE TO CUTTER SPINDLE UNDERSIDE
IN UPPERMOST POSITION 336 MM
WORKTABLE C L TO CUTTER SPINDLE CL 230 MM
MAXIMUM OD OF FIXTURE 483 MM
ROTARY FEED PER 25 MM OF STROKE .0254 MM-.3048 MM
ROTARY FEED FOR MULTI-PASS .001-.508 MM
RADIAL FEED RANGE PER STROKE .00254 MM-.508 MM
MAX RADIAL FEED PER MINUTE 3 MM
MACHINE DIMENSIONS 2362 MM X 2616 MM
MACHINE HEIGHT 2565 MM
APPROX MACHINE WEIGHT 5447 KG

EQUIPPED WITH:

HYDRAULICALLY OPERATED CUTTER GUARD ASSEMBLY
HYDRAULICALLY OPERATED COLLET FIXTURE

 

Product Details:

Specification

                                          
Maximum cone distance (2.75"-3.5" face)^12"        

Maximum cone distance (1" face)^11-1/8" 

    
Minimum cone distance^0"  

       
Maximum pitch angle (angular gears)^105 deg     

Maximum pitch angle (90-degree shafts)^84 deg/18min.

Minimum pitch angle^5 deg/42min.

Maximum ratio^10/1   

    
Maximum pitch diameter^(see table) 

Maximum face width^3.5"   

   
Maximum Stroke Length^.5"-4.5"   

Index Range (inclusive (+up to 200)^5-100       

     
Maximum pitch^3 DP (nominal)

Diameter of hole in work spindle (large end)^3-29/32"   

Spindle taper per foot^39/64" 

    
Depth of spindle taper^6"

Diameter of spindle hole (15.75" deep)^3.25"

Spindle nose to center line^2.5 to 15"

Product Details:

• Machine Id : 360
• Model : 250/4 With Grinding Attachment
• Make : WMW
• Year : 1995
• Location : Mumbai Warehouse, India
• Category : Gear Related Machines
• Country : Germany
• Type of Machine : Hob Relieving Lathe Heavily Equipped
• Weight : 0.0
• Asking Price : on call
  
  

Specification :

• Turning diameter over bed : 300 mm
• Turning diameter over slide : 250 mm
• Turning length : 630 mm
• Centre distance : 1000 mm
• Taper bore : MK 5
• Turning speed range : 1 - 400 U/min
• Longitudinal feeds: 0,0063 - 10 mm/U
• Return movement speed : 5 - 700 U/min
• Electrics - voltage/frequency : 380 / 50 V/Hz
• Power capacity :16 kW

Additional Information:

• Item Code: 360

Product Details:

Specification

Roto-Flo Model 3225 Spline Roller

Max stroke of machine: 30 in; 763 mm
Max length of racks: 24 in; 610 mm
Max outside diameter: 1.5 in; 38 mm
Range of diameter pitches: 20/40 & 1.2700/.635
Equipped with:
Hydraulic unit w/ 20 HP motor
Trabon Lube System
Coolant pump and motor
Universal Headstock
Underarm outboard support

 

MACHINE DIMENSIONS:
Length: 141 in;   3561mm
Depth: (including hydraulic unit and over arm): 127 in; 3225 mm
Height: (including electrical panel) 85 in; 2159 mm
Approx net weight: 21,000 lbs; 9528 kg

Description

 

The machine is for the cold rolling of shafts and is equipped with two rack type forming tools and two slides on an extremely rugged "C"-shaped machine frame. ROTO-FLO is a process in which the metal periphery of a part is displaced from is undisturbed condition (such as a straight shaft) by cold working until it assumes a desired shape (spline, serration, etc).The entire forming process takes place within seconds in one continuous operation

Product Details:

Specification

 

 

The MAAG SH-45 Gear Cutting Machine is suitable for machining of:
* External & internal cylindrical gears

 

* Pinions *

 

 Spur & helical gears *

 

 Gear teeth with longitudinal and profile corrections

 

 * Cluster gears

 

* Double helical gears

 

* Sprocket wheels *

 

 

 

PARTICULAR ADVANTAGES:

 

 

 

* Wide range of applications (gear diameters 0.8" to 18")
* High economy (Thanks to simple, inexpensive tooling and high rate of
metal removal)
* High accuracy (Long life assured by operating principle and robust
machine construction)
* Automatic machining cycles (A large number of automatic working cycles
are available for the various fields of application)

 

 

 

 

 

 

 

 

 

PRINCIPAL SPECIFICATIONS AS PER CATALOGUE:

 

 

 

 

 

 

 

Maximum/minimum rated diametrical pitch... 4.2/25
Maximum/minimum rated gear blank... 18"/0.8"
Maximum rated spur gear face width... 4.75"
Maximum/minimum number of teeth... 250/6
Maximum helix angle... 60 Deg.
Maximum weight of gear and fixture... 880 lbs.
Maximum/minimum stroke of cutter slide... 5.7/0
Maximum/minimum position of cutter above table at stroke... 12.6/5.5
Range of cutter strokes (12)... 37-235 SPM
Strokes per pitch, steplessly adjusted... 9 half 80

 

 

Product Details:

Specification

Used Hypoid Gear Lapper ,overhauled in 1999 and since then it has been in use very  little.

Brake,Hydraulic chucking to both heads.

Pinion and cone motion switches 4 front and 6 at side.

Very good machine , Maximum Gear Diameter  266mm,

Maximum Pinion Diameter 152mm 

Pinion Spindle :

Diameter of taper hole at large end  100mm, 
taper /foot 15mm,depth of taper

Diameter of hole through spindle 63mm.

Gear Spindle :-

Diameter of taper at large end  58mm

Taper/foot   13mm

Depth of Taper  76mm

Diameter of hole through spindle 55m.

Description

Used Hypoid Gear Lapper , overhauled in 1999 and since then it has been in use very little.. Eddy Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.Very good machine

Product Details:

Specification

Used Hypoid Gear Lapper ,overhauled in 1999 and since then it has been in use very  little.

Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.

Very good machine, Maximum Gear Diameter  266mm, Maximum Pinion Diameter 152mm

Pinion Spindle :Diameter of taper hole at large end  100mm, 

taper /foot 15mm,

depth of taper, Diameter of hole through spindle 63mm.

Gear Spindle :-Diameter of taper at large end  58mm

Taper/foot   13mm

Depth of Taper  76mm

Diameter of hole through spindle 55m.

Description

Used Hypoid Gear Lapper , overhauled in 1999 and since then it has been in use very little.. Eddy Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.Very good machine

Other Machines

Product Details:

SpecificationDescription

Excellent Condition Machine

Product Details:

Specification

KARL KLINK 80T

Vertical Broaching Machine

Stroke : 2500mm

Power : 80T 

New electric cabinet in 2007

Table bore 300mm

Maxi broach length 2500 mm

New PLC have been set up in 2007, all motors are also been replaced. Working condition is very good

Product Details:

Specification

Technical data:

• Max. centre width: 600 mm
• Centre height: 155 mm
• Maximum clamping length for arbors: 700 mm
• Max. table travel: 550 mm
• Maximum grinding depth: 90 mm
• Table speed infinitely variable: 0-16 m/min
• Axial adjustment of the grinding spindle: 220 mm
• Vertical adjustment of the grinding slide: 200 mm
• Speed of the grinding spindle in standard version: 2200 rpm
• Largest number of flutes: 44
• Swivelling range of the grinding slide on both sides: 45 degrees
• Swivelling range of the grinding spindle from the horizontal to the top: 15 degrees
• Largest grinding wheel diameter: 300 mm
• Smallest grinding wheel diameter: 150 mm
• Largest workpiece diameter: 300 mm
• Taper of the main spindle: Morse 4

Product Details:

Specification

KAPP AST-203 Gear Hob Sharpner Machine complete with 13  Index Plates 

8, 10, 11, 12, 15, 16, 17, 18, 

18, 20, 22, 24, 30

 PRODUCT SPECIFICATIONS

CAPACITIES:

MAX. DISTANCE: FRONT EDGE OF INDEXING DEVICE SPINDLE

TO TAILSTOCK CENTER 17.32"

MAX. DISTANCE BETWEEN CENTERS 13.39"

STANDARD CENTER HEIGHT 4.13"

MAX. WORKPIECE DIAMETER ........ 8"

MAX. TABLE STROKE 12.40"

TABLE SPEED, COMPLETE TRAVERSE GRIND 9.5-52 FPM

TABLE SPEED, DEEP GRINDING 0-3 FPM

GRINDING SPINDLE SWIVEL, HORIZONTAL 15 DEGREES

AXIAL GRINDING SPINDLE ADJUSTMENT:

- IN 15 DEGREE POSITION 0.7"-0.59"

- IN HORIZONTAL POSITION +2.36"/-0.787"

DISTANCE, CENTERLINE TO GRINDING SPINDLE CENTER:

- IN 15 DEGREE POSITION        3.15"-9.84"

- IN HORIZONTAL POSITION      0-5.7"

VERTICAL GRINDING HEAD ADJUSTMENT 6.7"

GRINDING SPINDLE SPEED 3000 RPM

GRINDING SPINDLE SPEED      4000 RPM

GRINDING SPINDLE SPEED OPTION 3200 RPM

MAX. GRINDING WHEEL DIAMETER 8"

FLUTE LEAD, INFINITELY ADJUSTABLE 0-15 DEGREE

FLUTE LEAD 24"-INFINITE

MAIN SPINDLE TAPER    ISA 40

AUTO SINGLE FEED WITH 4" WORKPIECE 0-.0016"/TOOTH

AUTO FEED DEEP-GRINDING, MAX. .002"/REV.

PRE-SELECTED FEEDS 0-9999

GRINDING SPINDLE MOTOR 4.05 HP

HYDRAULICS MOTOR 2 HP

INDEXING MOTOR .12 HP

COOLANT PUMP  .92 HP

CHEMAPERM SYSTEM .12 HP

OIL MIST EXHAUSTER 1 HP

ACTUAL DIMENSIONS, STANDARD 70" X 100" X 95"

APPROXIMATE WEIGHT 4,500 LBS.

 

Product Details:

Specification

Max. wheel diameter: 300 mm

 

Gear width: 170 mm

 

Max. module: 5, Min.

 

Module: 0,5

 

Clamping length max.: 420 mm,

 

Max. angle of teeth: 45 grad

 

Min. number of teeth: 12, Max. number of teeth: 130

 

Slide stroke: 200 mm

 

Helical lead min./max: 200-6.000 mm

 

Max. dia. of grinding wheel 350 mm

 

Max. width of grinding wheel: 84 mm

Product Details:

Specification

Used Gear Shaper Cutter Sharpener
Mico Collette A015 is specially designed for rapid accurate and automatic sharpening of spur and ehlical gears. It is simple and quick operation to change the machine over from spur to helical gear cutter sharpening

For sharpening helical shaper cutters and spur shaper cutters-machine with fully automatic cycle and automatic wheel dressing.

GRINDING HEADS:-Internal M.T.4 Cutter adapter 1 1/4" dia. and 1 3/4" dia.,

Location internal M.T.4

INDEXING MECHANISM:-Hydraulically

driven-faultless indexing

NUMBER OF TABLE STROKES:-per minute 20-80

LENGTH OF TABLE STROKES:-infinitely variable from 5-115mm

WHEEL SPINDLE SPEEDS:-2500 and 3200 r.p.m.

Grinding wheel diam. for standard application 200mm

max. permissible 250mm

bore diameter 76.2 mm = 3"

Advance to grinding position by means of push-button

AUTOMATIC INFEED:-Infeed range 1.1mm

Diminishing feed 0-0,035mm

AUTOMATIC GRINDING WHEEL :-Dressing infeed compensation

Provisions for manual dressing with the aid of push-button

2 Dressing speeds for rough and finish grinding

Automatic switching over of the dressing speed

Dressing performed with table in loading positions

CENTRAL LUBRICATION:- automatic

LIGHTING :-40 W - 24 Volt

MOTOR RATINGS :-Wheel motor  1 KW 3000 r.p.m.

Hydraulic motor 0,75 KW 1500 r.p.m.

Coolant pump 0,1 KW 3000 r.p.m.

Motor for spur cutters  0,25 KW 1000 r.p.m.

Product Details:

• Machine Id : 542
• Model : dh250/3
• Make : WMW
• Year : 0
• Location : Mumbai Warehouse, India
• Category : Gear Related Machines
• Serial No : 430.0014.15
• Country : Germany
• Type of Machine : Hob relieving lathe with grinding attachment
• Weight : 0.0
• Asking Price : on request
  
  

Specification:

• Turning diameter over bed - 300 mm
• Turning diameter over slide - 250 mm
• Turning length - 630 mm
• Centre distance - 1000 mm
• Taper bore - MK 5
• Turning speed range - 1 - 400 U/min

Product Details:

Specification

MAAG DSH20 GEAR SHAPER (rebuilt 2017)
Choice of two similar machines for sale

Product Details:

Gear Hobber Universal

• Machine Id : 705
• Model : FO 16
• Make : Tos
• Year : 0
• Location : Mumbai Warehouse, India
• Category : Gear Related Machines
• Country : Czech Republic
• Type of Machine : Gear Hobber Universal
• Weight : 0.0
• Asking Price : On Request

Specification :

• Max. gear wheel module
  
• Max. machining 16
• With normal machine loading 20
• Max. gear wheel diameter mm 1600
• Max. gear wheel diameter without steady with normal machine loading mm 2000
• Max. gear wheel width with straight teeth
• Gear wheel diameter above 1350 mm mm 560
• Gear wheel diameter below 1350 mm mm 500
• Max. distance between spindle and table surface mm 1050
• Min. distance between spindle and table surface mm 400
• Max. distance between spindle and table mm 1150
• Min. distance between spindle and table mm 100
• Table diameter mm 1350
• Table boring diameter mm 180
• Number of T-shaped groove mm 8
• Milling arbor diameter mm 32-40-50-60
• Number of milling spindle revolutions in R 10 row, =1,26 from-to U/min 16- 80
• Main motor power PS 15
• Fast motor power PS 7,5

Additional Information:

• Item Code: 705

Product Details:

This machine is recontrol or recertification with SIEMENS 828 Advance Syatem Exactly as per Liebherr Standards . The Old Original Liebherr CNC System Is replaced . All recontrolled and recertified machines are fully cleaned. All moving slides, spindles and parts handling systems are inspected for problems. Any gibs or adjustable backlash systems are adjusted to the best possible settings. All hydraulic, coolant, lubrication and pneumatic systems are checked for proper functionality and leaks. All filters are replaced. All worn hoses, broken cables, connectors, buttons, lamps and wires are replaced. All guarding is installed and checked. All machine cycles are tested. Parts are cut to verify the machine capability. Charts from the test cutting are documented for your viewing.Mechanical Specifications Maximum work piece diameter 6" (150mm)Maximum pitch (module) 86000 psi steel DP(Module-5)Maximum hob slide travel10" (250mm)Table clamping surface4.7"(120mm)Maximum table rotation150 rpm Minimum distance between hob CL and table center.59"(15mm)Maximum distance between hob CL and table center6.88"(175mm)Minimum distance between hob CL and table surface2.00"(50mm)Maximum distance tailstock casting to work piece table24.80"(630mm)Minimum number of teeth hobbed 3ob head swivel range+ / - 45 DegreesMaximum diameter hob5.20"(132mm)Maximum hob length7.10"(180mm)Maximum tangential travel (shifting)7.10"(180mm)Hob spindle speed ranges120 to 1200 rpm Rapid traverse: Axial157.5"/min00mm/min) Radial7.5"/min00mm/min) Tangential118.0"/min(3000mm/min)Machine approximate net weight16,060 lbs.(7,300kgs)Feed ranges: Axial.004-.787"/rev(.1-20mm/rev) Tangential.0004-.197"/rev.01-5mm/rev)Radial.004-.147"/rev(.1-4 mm/rev)Total connected power40 HP (30 kVA)Operating Voltage470 V, 60Hz Control Voltage 110 Vloor space: Length162" (4100mm) Width148" (3770mm)Machine overall height w/enclosure102" (2600mm)FeaturesMachine bed with stationary table assembly, table spindle with anti-friction roller bearingsPre-loaded re-circulating ball screws for axial, radial, and tangential feed/motionsain column with infinitely variable radial feedPower swivel hob-head for axial, radial, and tangential hobbing, hob-slide automatically clamped during work-cycles, with incremental hob-shifting, pre-selectable in both directions.Hob head with mounted 13.1 HP, DC main motor for infinitely variable hob speedsQuick-change" hob change system, with automatic clamping and unclamping of hob arbor and outer support bearing, controlled via push-buttonTailstock column with electrically actuated arm, (CNC control of tailstock arm)Hydraulic clamping device (double acting) with infinitely variable clamping pressure (up to 8,800 lbs.) mounted below machine table for actuating work piece & fixture clampingWork table positioning device providing work-table stop in pre-programmed position enabling pre-identifying gear tooth alignment prior to cutting teeth.ControlsCNC Systems- X radial movement B hob rotation- Z axial movement V tangential movement- C table rotation A hob head swivel- Z1 tailstock arm positioningThe electronic synchronization of the generating process, (i.e. hob & table rotation), is integrated in the CNC-system.Helix generation, (i.e. linking of the axial slide movement and table rotation, as well as tangential hobbing), (i.e. linking of tangential movement and table rotation), integrated in the CNC-system.Copy system for "crowning" and end relief are part of the CNC-system, (i.e. linkage of radial and axial motion) linear and circular interpolation, max. radius 328 ft. (100M).Feeds programmable in mm or inches/table revolution,

Additional Information:

• Item Code: 1188

Product Details:

Specification

Please note if you dont need hydrulic clamping & Hydrulic Tailstock
then please do not enquire about this machine

Vertical-spindle gear generating shaper with automatic work cycle

Machine with tail stock hydrulic

Maximum Module:-6.
Minimum Module:- 1.
Maximum Diameter:-500mm.
Minimum Diameter:-50mm.

Product Details:

Specification

Specification

max. diam. 500 mm
max. Modul 10
max. gear width 400 mm
change gears

 

This machine is recontrol or recertification with SIEMENS 808 Advance Syatem Exactly as per Liebherr Standards.
The Old Original Liebherr CNC System Is replaced . All recontrolled and recertified machines are fully cleaned.
All moving slides, spindles and parts handling systems are inspected for problems.
Any gibs or adjustable backlash systems are adjusted to the best possible settings.
All hydraulic, coolant, lubrication and pneumatic systems are checked for proper functionality and leaks.  
All filters are replaced. All worn hoses, broken cables, connectors, buttons, lamps and wires are replaced.
All guarding is installed and checked.
All machine cycles are tested. Parts are cut to verify the machine capability.
Charts from the test cutting are documented for your viewing.

Product Details:

Gear Shaper

Machine ID : 202
Make : demm
Model : si-8-750
Year : 0
Location : Mumbai Warehouse, India
Category : Gear Related Machines
Country : Italy
Type of machine : Gear Shaper
Asking Price : On Request 

Specification :

max modul 8.
max face width 130mm.
max diameter for external straight gears 750 mm.
max diameter for external helical gears 670mm.
max diameter for internal straight gears 450mm.
max diameter for internal helical gears. 440mm.
max degrees with helical guide.. 45 Degree.
minimum degree with helical guide. 3 Degree.
stroke per minutes.......from 42 to 240.
spindle speeds....6.
feeds...8.
spindle bore.....mm. 4,45 or mm. 31,75.
main motor....HP 5
Description :

800mm Gear Shaper Heavy Duty.

Additional Information:

• Item Code: 202

Product Details:

Specification

The SCT 3 Universal Chamfering and Deburring Machine with two tool heads has been designed for manufacturing spur and helical gears.

The SCT 3 features a shuttle feed loader for manual loading/unloading as standard and can be easily connected to a variety of automation systems or robots. The chamfering and deburring machine is a result of the technical collaboration between Samputensili Italy and Grind Master India in the field of advanced gear deburring and chamfering machines. Samputensili is a world-famous global supplier of machine tools and cutting tools for the gear manufacturing.

Grind Master is well-known for its expertise in metal finishing, deburring and micro-finishing. Deburring operation using proven and reliable Samputensili deburring tool heads, spring-loaded to compensate for face width variations. Chamfering operation using the patented Samputensili chamfer and chamfer-roller tools for a better final result.

Self-centering tools guarantee symmetrical chamfers on both sides of the workpiece even in the instance of slight displacements between adjacent teeth (for example cluster gears). The two tool heads are meshed with the workpiece by pneumatic cylinders to compensate workpiece runout. This results in symmetrical and constant chamfers on all teeth.

Main advantages:

• Chamfering, rolling and deburring in a single process
• Easy connection to a variety of automation systems or robots
• Possibility to use trademark tools in-house manufactured
• Different faces are possible
• Extreme short cycles time
• Low cost for chamfering, rolling and deburring

 

Technical Data

 

 

 

 

 

Product Details:

Specification

The SCT 3 Universal Chamfering and Deburring Machine with two tool heads has been designed for manufacturing spur and helical gears.

The SCT 3 features a shuttle feed loader for manual loading/unloading as standard and can be easily connected to a variety of automation systems or robots. The chamfering and deburring machine is a result of the technical collaboration between Samputensili Italy and Grind Master India in the field of advanced gear deburring and chamfering machines. Samputensili is a world-famous global supplier of machine tools and cutting tools for the gear manufacturing.

Grind Master is well-known for its expertise in metal finishing, deburring and micro-finishing. Deburring operation using proven and reliable Samputensili deburring tool heads, spring-loaded to compensate for face width variations. Chamfering operation using the patented Samputensili chamfer and chamfer-roller tools for a better final result.

Self-centering tools guarantee symmetrical chamfers on both sides of the workpiece even in the instance of slight displacements between adjacent teeth (for example cluster gears). The two tool heads are meshed with the workpiece by pneumatic cylinders to compensate workpiece runout. This results in symmetrical and constant chamfers on all teeth.

Main advantages:

• Chamfering, rolling and deburring in a single process
• Easy connection to a variety of automation systems or robots
• Possibility to use trademark tools in-house manufactured
• Different faces are possible
• Extreme short cycles time
• Low cost for chamfering, rolling and deburring

 

Technical Data

 

Product Details:

Specification

Max Dia- 180mm

 

 

 

Max Module:- 8.

 

 

 

Michigan shaver cutter grinder capacity

 

 

 

max.grinding Wheel 30 Inch

max. Cutter  Diametr 12 Inch

max.Face Width of Gear 3Inch

No.  of index plates for both machines   55

 

 

 

 

 

 

 

 

Description

Gear Shaver Cutter Grinder (Choice of Two Machines With Full Set Of Indexing Plates)

Product Details:

Specification

 

CNC version of Sykes older model V-10C

 

Siemens 808 CNC System controls three axis Table Rotation (C2 axis)

 

Infeed (X axis) and Rotary Feed of the cutter ( C1 axis)

 

Swiveling pendant control mounted on top of the electrical cabinet No change gears ,

 

Hydraulic clamping of work piece and hydraulic tailstock

 

Main spindle motor Siemens AC Servo

 

Safety Guards 

SPECIFICATION :

Spindle Motor:1PH8101-1DF00-1CA1,

X-axis (Radial Feed) Servo Motor:1FK7063-2AF71-1RA1,11Nm,3000rpm

 

C1-axis (Circular Feed) Servo Motor:1FK7063-2AF71-1RA1,11Nm,3000rpm

C2-axis (Circular Feed) Servo Motor:1FK7063-2AF71-1RA1,11Nm,3000rpm

Hydraulic pump motor: 415v, 1.1kw/1.5Hp, 2.51Amp., 1415rpm)

 

Coolant pump: 3-phase, 380/440v, 0.5Hp, 0.9Amp., 1425rpm

General Lubrication Motor: 3-phase, 380v, 0.25Hp, 0.55Amp., 1380rpm

Cyclic Lubrication Unit Motor: 220v, 40kw, 0.6Amp., 1500rpm

 

Capacity:

Pitch ( Minimum - Maximum ) 0.5mm to 6.3 Module

Face Width & Stroke length :- 100MM

Maximum diameter 250MM

Maximum Helix angle +/- 45 degree

Cutter Spindle diameter 68.23mm

Work table dimension

Height of worktable above floor 930mm

Overall height of the machine 2200mm

Overall width 1350 mm

Overall depth ( front to back) 1750 mm 

 

 

Product Details:

SpecificationMAX STROKE, FACE WIDTH 100 MM
MAX DIAMETER 267 MM
MAX PCD INTERNAL GEARS 152 MM
SEMI AUTOMATIC MACHINE WITH 4 CUT CYCLE
267MM DIA, 6 MODULE
VERY GOOD CONDITION
TAIL STOCK

Product Details:

Specification

 

Product Details:

Specification

CNC Coniflex Straight Bevel Generator With GE FANUC SERIES O-GC System

Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

SPECIFICATIONS:

Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH

Product Details:

Hypoid Cutter Sharpener

Machine ID : 630
Make : Gleason
Model : 13
Year : 1998
Location : Mumbai Warehouse, India
Category : Gear Related Machines
Country : Germany
Type of machine : Hypoid Cutter Sharpener
Asking Price : On Request

Specification :

The No. 13 Gleason Hypoid Cutter Sharpener is a versatile,
precision wet type grinder for sharpening spiral bevel, hypoid, revacycle and coniflex cutters.
Automatic diamond rotation which rotates the dresser diamond approximately 9.2Degree
after each dressing cycle.

Diameter of spiral cutter 3.5" - 21"
Revacycle cutters, infeed attachment 16" - 25"
Coniflex cutters 9" - 15"
Wheel size 12" x .75" x 4" bore
Wheel type 30� bevel
FEEDS & SPEEDS
Times per blade 5 sec
Feed (roughing) 0.007"
Feed (finishing) 0.002"
Wired for 3/60/230/460V
Wheel drive motor 2 HP @ 1800 RPM
Feed drive motor 1 HP @ 1800 RPM
Hydraulic pump motor 1 HP @ 1200 RPM
Coolant pump motor 0.25 HP @ 3600 RPM
Floor space 91" x 48"

Approximate weight 9,000 lbs

 

 

Additional Information:

• Item Code: 804
• Production Capacity: Diameter of spiral cutter 3.5" - 21"
• Delivery Time: as per scheduled

Product Details:

• Machine Id : 360, 

WMW 250/4 with Grinding Attachment Hob Relieving LatheHob Relieving Lathe Heavily Equipped

• Model : 250/4 With Grinding Attachment
• Make : WMW
• Year : 1995
• Location :
• Category : Gear Related Machines
• Country : Germany
• Type of Machine : Hob Relieving Lathe Heavily Equipped
• Asking Price : On Call
  
  

Specification:

• Turning diameter over bed : 300 mm
• Turning diameter over slide : 250 mm
• Turning length : 630 mm
• Centre distance : 1000 mm
• Taper bore : MK 5
• Turning speed range : 1 - 400 U/min
• Longitudinal feeds : 0,0063 - 10 mm/U
• Return movement speed : 5 - 700 U/min
• Electrics - voltage/frequency : 380 / 50 V/Hz
• Power capacity : 16 kW

Product Details:

Specification

 

CATALOG SPECIFICATIONS:

Maximum Pitch Diameter with a 4" Hob 13.32"
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811"
Travel Of Hob Head Carriage: 8.858"
Work Table Diameter: 12.401"
Hob Spindle Centerline Above Machine Table: 6.496" Minimum
Maximum Length Of Workpiece: 26.772"
Infinitely Variable Radial Feed: .039" - .472"/Minute
Rapid Traverse Of Hob Slide: 37.795"/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length ...5.900" Maximum Hob Diameter: 5.512"
Maximum Hob Shift Or Tangential Travel: 5.900"
Hob Head RPM, Infinitely Variable: 80 -640

Product Details:

Specification

 

CATALOG SPECIFICATIONS:

Maximum Pitch Diameter with a 4" Hob 13.32"
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811"
Travel Of Hob Head Carriage: 8.858" 
Work Table Diameter: 12.401"
Hob Spindle Centerline Above Machine Table: 6.496" Minimum
Maximum Length Of Workpiece: 26.772"
Infinitely Variable Radial Feed: .039" - .472"/Minute
Rapid Traverse Of Hob Slide: 37.795"/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length ...5.900" Maximum Hob Diameter: 5.512"
Maximum Hob Shift Or Tangential Travel: 5.900"
Hob Head RPM, Infinitely Variable: 80 - 640

Product Details:

Specification

 

CATALOG SPECIFICATIONS:

Maximum Pitch Diameter with a 4" Hob 13.32"
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811"
Travel Of Hob Head Carriage: 8.858"
Work Table Diameter:12.401"
Hob Spindle Centerline Above Machine Table: 6.496" Minimum
Maximum Length Of Workpiece: 26.772"
Infinitely Variable Radial Feed: .039" - .472"/Minute
Rapid Traverse Of Hob Slide: 37.795"/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length ...5.900" Maximum Hob Diameter: 5.512"
Maximum Hob Shift Or Tangential Travel: 5.900"
Hob Head RPM, Infinitely Variable: 80 - 640

Product Details:

Specification

 

CATALOG SPECIFICATIONS:

Maximum Pitch Diameter with a 4" Hob 13.32"
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811"
Travel Of Hob Head Carriage: 8.858"
Work Table Diameter: 12.401"
Hob Spindle Centerline Above Machine Table: 6.496" Minimum
Maximum Length Of Workpiece: 26.772"
Infinitely Variable Radial Feed: .039" - .472"/ Minute
Rapid Traverse Of Hob Slide: 37.795"/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length ...5.900" Maximum Hob Diameter: 5.512"
Maximum Hob Shift Or Tangential Travel: 5.900"
Hob Head RPM, Infinitely Variable: 80 - 640

Product Details:

Specification

 

CATALOG SPECIFICATIONS:

Maximum Pitch Diameter with a 4" Hob 13.32"
Maximum Pitch For Hobbing Steel: 4,25 DP
Maximum Workpiece Diameter: 11.811"
Travel Of Hob Head Carriage: 8.858"
Work Table Diameter: 12.401"
Hob Spindle Centerline Above Machine Table: 6.496" Minimum
Maximum Length Of Workpiece: 26.772"
Infinitely Variable Radial Feed: .039" - .472"/Minute
Rapid Traverse Of Hob Slide: 37.795"/Minute
Weight Of Machine: 14,000# Approx
Maximum Hob Length ...5.900" Maximum Hob Diameter: 5.512"
Maximum Hob Shift Or Tangential Travel: 5.900"
Hob Head RPM, Infinitely Variable: 80 - 640

Additional Information:

• Item Code: 1280-1
• Production Capacity: Heavy Production Gear Hobber
• Delivery Time: as per request

Product Details:

Specification

WORKING AREA:
450mm diameter 0VER 400mm
MAX GEAR LENGTH 75mm

GEAR FORMS INCLUDE:

EXTERNAL SPURS
EXTERNAL HELICAL
EXTERNAL RATCHET
EXTERNAL SPLINES
DOUBLE HELICALS

Product Details:

Product Details:

Specification

Broach Sharpening Machine

Manufacturer:  KLINK

Model / Type:    460

Manufacturing number 1090,

Grinding length max. 2000 mm,

Grinding width max. 300 mm,

Centre width 2000 mm,

Grinding table clamping surface 2700 x 200 mm,

Table movement by hand 2000 mm,

Grinding support: movement horizontal hydraulic 300 mm,

Vertical by hand 260 mm,

Swivelling 60°,

Grinding head swivelling range 90°,

Disengaging movement 25 mm,

Disengaging angle 11°,

Clamping breaker slide: Working stroke by hand 10 mm,

Movement horizontal by hand 115 mm,

Grinding spindle: taper 1:6,

Magnetic clamping plate 1000 x 100 mm,

Swivel range 90°,

Height adjustment 12 mm,

Grinding spindle 60 mm diameter x 250 mm

Machine Weight approx. 4,200 kg

Dimensions (l x w x h) approx.    5,000 x 1,700 x 2,100 mm

Product Details:

Specification

EQUIPPED WITH:

Hob Arbor

26"T-Slotted Table

Auto Cycle

Differintial

Coolant Splash Guards

SPECIFICATIONS:

Maximum Wheel Diameter.....................................500mm
Maximum Gear Width.........................................410mm
Maximum Module.............................................10 Mod
Maximum Hob Diameter.......................................195mm
Table Diameter.............................................700mm
Turning Speed Range........................................40-280 U/Min.
Power Capacity.............................................12.5 Kw
Voltage/Frequency..........................................220/50 V/Hz
Feed-Axial.................................................0.2-8 mm/min.
Feed-Radial................................................0.1-2 mm/min.
Feed-Tangential............................................0.1-2 mm/min.

Product Details:

Additional Information:

• Item Code: 405

Product Details:

Specification

This Gear Hobber is BALL Screw Machine, Accuracy level is much much Higher then any other Lead Screw Machine.

Max Dia:-300mm

Max Module:-10 Module (Hob Dia 120mm)

Hydraulic Machine with two cut cycle.

Description

 Universal Hydraulic Gear Hobber With Ball Screw