Gleason Machines

Product Details:

Used Hypoid Gear Lapper ,overhauled in 1999 and since then it has been in use very  little.

Brake,Hydraulic chucking to both heads.

Pinion and cone motion switches 4 front and 6 at side.

Very good machine

Maximum Gear Diameter  266mm,

Maximum Pinion Diameter 152mm

Pinion Spindle :

Diameter of taper hole at large end  100mm, 
taper /foot 15mm,

depth of taper

Diameter of hole through spindle 63mm.

Gear Spindle :-

Diameter of taper at large end  58mm

Taper/foot   13mm

Depth of Taper  76mm

Diameter of hole through spindle 55m.

Used Hypoid Gear Lapper , overhauled in 1999 and since then it has been in use very little.. Eddy Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.Very good machine

Product Details:

The No. 13 Gleason Hypoid Cutter Sharpener is a versatile,
precision wet type grinder for sharpening spiral bevel, hypoid, revacycle and coniflex cutters.
Automatic diamond rotation which rotates the dresser diamond approximately 9.2Degree
after each dressing cycle.

Diameter of spiral cutter 3.5" - 21"
Revacycle cutters, infeed attachment 16" - 25"
Coniflex cutters 9" - 15"
Wheel size 12" x .75" x 4" bore
Wheel type 30� bevel
FEEDS & SPEEDS  
Times per blade 5 sec
Feed (roughing) 0.007"
Feed (finishing) 0.002"
Wired for 3/60/230/460V
Wheel drive motor 2 HP @ 1800 RPM
Feed drive motor 1 HP @ 1800 RPM
Hydraulic pump motor 1 HP @ 1200 RPM
Coolant pump motor 0.25 HP @ 3600 RPM
Floor space 91" x 48"
Approximate weight 9,000 lbs

Product Details:

Used Hypoid Gear Lapper ,overhauled in 1999 and since then it has been in use very  little.

Brake,Hydraulic chucking to both heads.

Pinion and cone motion switches 4 front and 6 at side.

Very good machine

Maximum Gear Diameter  266mm,

Maximum Pinion Diameter 152mm

Pinion Spindle :

Diameter of taper hole at large end  100mm, 
taper /foot 15mm,

depth of taper

Diameter of hole through spindle 63mm.

Gear Spindle :-

Diameter of taper at large end  58mm

Taper/foot   13mm

Depth of Taper  76mm

Diameter of hole through spindle 55m.

Used Hypoid Gear Lapper , overhauled in 1999 and since then it has been in use very little.. Eddy Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.Very good machine

Product Details:

Additional Information:

• Item Code: 351

Product Details:

Excellent Machine Under Power.
CNC Coniflex Straight Bevel Generator With GE FANUC SERIES O-GC System

Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

SPECIFICATIONS:

Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH

Product Details:

Excellent Machine Under Power.
CNC Coniflex Straight Bevel Generator With GE FANUC SERIES O-GC System

Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

SPECIFICATIONS:

Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH

Product Details:

Excellent Machine Under Power.
CNC Coniflex Straight Bevel Generator With GE FANUC SERIES O-GC System

Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)

SPECIFICATIONS:

Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
Main Motor: 5 HP - 480V - 1800 RPM - 60 Hz - 3 PH

Product Details: